JB/T 6083-2006 固结磨具 碾米砂轮
作者:标准资料网 时间:2024-05-12 01:15:04 浏览:9789
来源:标准资料网
下载地址: 点击此处下载
基本信息
| 标准名称： | 固结磨具 碾米砂轮 |
| 英文名称： | Bonded abrasive products-Grinding wheel for husking rice |
| 中标分类： | 机械 >> 工艺装备 >> 磨料与磨具 |
| ICS分类： | 机械制造 >> 切削工具 >> 磨料磨具 |
| 替代情况： | 替代JB/T 6083-1992 |
| 发布部门： | 国家发展和改革委员会 |
| 发布日期： | 2006-11-27 |
| 实施日期： | 2007-05-01 |
| 首发日期： | |
| 作废日期： | |
| 主管部门： | 国家发展和改革委员会 |
| 提出单位： | 中国机械工业联合会 |
| 归口单位： | 全国磨料磨具标委会 |
| 起草单位： | 鄂州市方方磨具有限责任公司 |
| 出版社： | 机械工业出版社 |
| 出版日期： | 2007-05-01 |
| 页数： | 20页 |
| 批文号： | 19278-2007 |
| 书号： | 15111·8077 |
适用范围
本标准规定了碾米砂轮的分类、标记、技术要求、试验方法、检验规则、标志、包装、运输、贮存和安装使用。本标准适用于陶瓷结合剂和树脂结合剂碾米砂轮。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 机械 工艺装备 磨料与磨具 机械制造 切削工具 磨料磨具
下载地址: 点击此处下载
【英文标准名称】:Photovolaticdevices-Part6:Requirementsforreferencesolarmodules(IEC60904-6:1994);GermanversionEN60904-6:1994
【原文标准名称】:光生伏打器件.第6部分:基准太阳能模块组件的要求
【标准号】:EN60904-6-1994
【标准状态】:现行
【国别】:
【发布日期】:1996-02
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:校正;电气工程;规范(验收);元部件;作标记;安装;选择;光电器件;太阳能动力装置;太阳能;太阳能集热器;技术数据单;外壳;太阳能电池;模数
【英文主题词】:
【摘要】:光生伏打器件.第6部分:基准太阳能模块组件的要求
【中国标准分类号】:F12;L50
【国际标准分类号】:27_160
【页数】:6P;A4
【正文语种】:英语
Product Code:SAE J1979
Title:E/E Diagnostic Test Modes
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.
Rationale: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.
【原文标准名称】:光生伏打器件.第6部分:基准太阳能模块组件的要求
【标准号】:EN60904-6-1994
【标准状态】:现行
【国别】:
【发布日期】:1996-02
【实施或试行日期】:
【发布单位】:欧洲标准学会(EN)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:校正;电气工程;规范(验收);元部件;作标记;安装;选择;光电器件;太阳能动力装置;太阳能;太阳能集热器;技术数据单;外壳;太阳能电池;模数
【英文主题词】:
【摘要】:光生伏打器件.第6部分:基准太阳能模块组件的要求
【中国标准分类号】:F12;L50
【国际标准分类号】:27_160
【页数】:6P;A4
【正文语种】:英语
Product Code:SAE J1979
Title:E/E Diagnostic Test Modes
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.
Rationale: This document supersedes SAE J1979 May 2007, and is technically equivalent to ISO 15031-5 2010, with the addition of new capabilities required by revised regulations from the California Air Resources Board and revised regulations from the European Commission. This document is intended to satisfy the data reporting requirements of On-Board Diagnostic (OBD) regulations in the United States and Europe, and any other region that may adopt similar requirements in the future. This document specifies:a.message formats for request and response messages,b.timing requirements between request messages from external test equipment and response messages from vehicles, and between those messages and subsequent request messages,c.behavior of both the vehicle and external test equipment if data is not available,d.a set of diagnostic services, with corresponding content of request and response messages, to satisfy OBD regulations,This document includes capabilities required to satisfy OBD requirements for multiple regions, model years, engine types, and vehicle types. Those regulations are not yet final for some regions, and are expected to change in the future. This document makes no attempt to interpret the regulations and does not include applicability of the included diagnostic services and data parameters for various vehicle applications. The user of this document is responsible to verify the applicability of each section of this document for a specific vehicle, engine, model year and region.SAE J1979/ISO 15031-5 specifies diagnostic services and functionally addressed request/response messages required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. Any external test equipment meeting the requirements of SAE J1978 is intended to be able to use these messages to retrieve emissions-related information from the vehicle.Each section of this part of SAE J1979/ISO 15031-5 which specifies additional detail to existing sections of ISO 9141-2, ISO 14230-4, SAE J1850, and ISO 15765-4 supersede those specifications.This part of SAE J1979/ISO 15031-5 references the SAE J1979-DA (Digital Annex), which includes all definitions of PIDs, OBDMIDs, TIDs and INFOTYPES. NOTE: SAE J1979/ISO 15031-5 provides the mechanism to satisfy the requirements included in the country-specific regulations and not all capabilities included in this document are required by the country-specific regulations. SAE J1979 is not considered a final authority for interpretation of the regulations, so readers should determine the applicability of capabilities defined in this document for their specific needs.