GB/T 18310.2-2001 纤维光学互连器件和无源器件 基本试验和测量程序 第2-2部分:试验 配接耐久性
作者:标准资料网 时间:2024-05-14 15:20:54 浏览:8603
来源:标准资料网
基本信息
标准名称: | 纤维光学互连器件和无源器件 基本试验和测量程序 第2-2部分:试验 配接耐久性 |
英文名称: | Fibre optic interconnecting devices and passive components--Basic test and measurement procedures--Part 2-2:Tests-Mating durability |
中标分类: |
电子元器件与信息技术 >>
光电子器件 >>
光电子器件组合 |
ICS分类: |
电信、音频和视频技术 >>
光纤通信 >>
光纤连接器
|
发布部门: | 国家质量技术监督局 |
发布日期: | 2001-02-01 |
实施日期: | 2001-08-01 |
首发日期: | 2001-02-13 |
作废日期: | 1900-01-01 |
主管部门: | 信息产业部(电子) |
归口单位: | 信息产业部(电子) |
起草单位: | 信息产业部电子工业标准化研究所 |
出版社: | 中国标准出版社 |
出版日期: | 2004-04-17 |
页数: | 8页 |
书号: | 155066.1-17627 |
适用范围
本标准目的是对光纤光缆连接器或其他互连器件经受一系列连续接合和分离循环后的效应进行评定。被试器件(DUT)经受一系列连续接合和分离循环。若具有多于一个的锁紧机构,在进行每一接合和分离循环时应将其他所有锁紧机构适当锁紧。典型的失效模式如下(但不限于):a)部件损坏或过度磨损;b)失去适用的接合和分离能力;c)密封损坏或磨损;d)接口破损、碎裂和刮痕;e)光性能降低。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 电子元器件与信息技术 光电子器件 光电子器件组合 电信 音频和视频技术 光纤通信 光纤连接器
【英文标准名称】:Informationtechnology;OpenSystemsInterconnection;systemsmanagement:objectmanagementfunction
【原文标准名称】:信息技术开放系统互连系统管理:客体管理功能
【标准号】:ISO/IEC10164-1-1993
【标准状态】:现行
【国别】:国际
【发布日期】:1993-06
【实施或试行日期】:
【发布单位】:国际标准化组织(IX-ISO)
【起草单位】:ISO/IECJTC1
【标准类型】:()
【标准水平】:()
【中文主题词】:开放系统互连;信息交换;应用层;信息技术;网络互连;数据处理
【英文主题词】:Applicationlayer;Dataprocessing;Informationinterchange;Informationtechnology;Networkinterconnection;OSI
【摘要】:Definesasystemsmanagementfunctionwhichmaybeusedbyanapplicationprocesstointeractforthepurposeofsystemsmanagement.Amongothers,establishesuserrequirementsforthestatemanagementfunction,establishesamodelthatrelatestheservicesandgenericdefinitionsprovidedbythisfunctiontouserrequirements,definestheservicesprovidedbythefunction,specifiestheprotocolthatisnecessaryinordertoprovidetheservices,definestherelationshipbetweentheserviceandmanagementoperationsandnotifications,definesrelationshipswithothersystemsmanagementfunctions.
【中国标准分类号】:L79
【国际标准分类号】:35_100_70
【页数】:24P;A4
【正文语种】:英语
Product Code:SAE AS4720
Title:Batch Qualification Procedure for Tensile Strength, Elongation and Specific Gravity of Polytetrafluoroethylene (PTFE) Resins, Virgin, Modified, Pigmented and Filled Compounds Used for Compression Molding
Issuing Committee:Ams P Polymeric Materials Committee
Scope:This SAE Aerospace Standard (AS) covers batch qualification procedure for virgin and compounded polytetrafluoroethylene (PTFE) resins used for compression molding. AS9100 requires virgin and modified PTFE as a testing material be representative of production PTFE and/or parts. The testing specified herein is limited to tensile strength, elongation and specific gravity. Any other tests required by the purchaser must be specified separately.