BS 1902 Sec.5.3-1990 耐火材料试验方法.第5部分:耐火和耐热性.第3节:热膨胀的测定(100℃以下的水平法)(1902-503法)
作者:标准资料网 时间:2024-05-20 08:13:26 浏览:9944
来源:标准资料网
【英文标准名称】:Methodsoftestingrefractorymaterials.Refractoryandthermalproperties.Determinationofthermalexpansion(horizontalmethodto1100C)(method1902-503)
【原文标准名称】:耐火材料试验方法.第5部分:耐火和耐热性.第3节:热膨胀的测定(100℃以下的水平法)(1902-503法)
【标准号】:BS1902Sec.5.3-1990
【标准状态】:作废
【国别】:英国
【发布日期】:1990-05-31
【实施或试行日期】:
【发布单位】:英国标准学会(BSI)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:热测量;耐火材料;校正;试验设备;试样;水平的;耐熔材料;成型耐火材料;热膨胀;热试验;试验条件;尺寸测量;尺寸
【英文主题词】:
【摘要】:
【中国标准分类号】:Q10
【国际标准分类号】:
【页数】:12P;A4
【正文语种】:英语
【英文标准名称】:Methodsoftestingrefractorymaterials-Refractoryandthermalproperties-Determinationofresistancetoattackbyslag(method1902-513)
【原文标准名称】:耐火材料试验方法.第5部分:耐火和耐热性.第13节:抗炉渣吸附性测定(1902-513法)
【标准号】:BS1902-5.13-1984
【标准状态】:现行
【国别】:英国
【发布日期】:1984-05-31
【实施或试行日期】:1984-05-31
【发布单位】:英国标准学会(BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:耐火材料;耐火材料;热试验;试样;炉渣;耐熔砖;厚度测量;高温试验;磨损试验;侵蚀;耐化学性试验;成型耐火材料;尺寸测量;耐火砖;试样制备;试验设备
【英文主题词】:Chemical-resistancetests;Dimensionalmeasurement;Erosion;High-temperaturetesting;Refractories;Refractorybricks;Refractorymaterials;Shapedrefractories;Slags;Specimenpreparation;Testequipment;Testspecimens;Thermaltesting;Thicknessmeasurement;Weartests
【摘要】:Describesaprocedureforcomparingtheresistanceofrefractorymaterialsagainstslagerosion.
【中国标准分类号】:Q46
【国际标准分类号】:81_080
【页数】:8P.;A4
【正文语种】:英语
Product Code:SAE AIR1871
Title:Lessons Learned From Developing, Implementing, and Operating a Health Management System for Propulsion and Drive Train Systems
Issuing Committee:E-32 Aerospace Propulsion Systems Health Management
Scope:SAE Aerospace Information Report AIR1871 provides valuable insight into lessons learned in the development, implementation, and operation of various health monitoring systems for propulsion engines and drive train systems. This document provides an overview of the lessons learned for ground-based systems, oil debris monitoring systems, lubrication systems, and Health and Usage Monitoring Systems (HUMS) for military and commercial programs. For each case study, this document presents a brief technical description, the design requirements, accomplishments, lessons learned, and future recommendations. The lessons learned presented in this document represent a fragment of the knowledge gained through experience when developing and implementing a propulsion health management system. Previous versions of this document contain additional lessons learned during the 1980’s and 1990’s that may be of additional value to the reader. This document will be maintained as technology progresses so that industry members may benefit from the lessons learned of others.
